Skip to main content

Biomimetic Coating-free Surfaces for Long-term Entrapment of Air Under Wetting Liquids

Penelitian - An eco-friendly, coating-free strategy has been developed to make solid surfaces liquid-repellent, which is crucial for the transportation of large quantities of liquids through pipes. Researchers have engineered nature-inspired surfaces that decrease frictional drag at the interface between liquid and pipe surface.

Piping networks are ubiquitous to many industrial processes ranging from the transport of crude and refined petroleum to irrigation and water desalination. However, frictional drag at the liquid-solid interface reduces the efficiency of these processes.

Penelitian Biomimetic Coating-free Surfaces for Long-term Entrapment of Air Under Wetting Liquids

Conventional methods to reduce drag rely solely on chemical coatings, which generally consist of perfluorinated compounds. When applied to rough surfaces, these coatings tend to trap air at the liquid-solid interface, which reduces contact between the liquid and the solid surface.

Consequently this enhances the surface omniphobicity, or ability to repel both water- and oil-based liquids. But if the coatings get damaged, then you are in trouble, noting that coatings breakdown under abrasive and elevated temperature conditions.

The team developed micro-textured surfaces that do not require coatings to trap air when immersed in wetting liquids by imitating the omniphobic skins of springtails, or Collembola, which are insect-like organisms found in moist soils.

The researchers worked to carve arrays of microscopic cavities with mushroom-shaped edges, called doubly reentrant (DRC), on smooth silica surfaces. Unlike simple cylindrical cavities, which were filled in less than 0.1 seconds on immersion in the solvent hexadecane, the biomimetic cavities retained the trapped air beyond 10,000,000 seconds.

To learn more about the long-term entrapment of air, the researchers systematically compared the wetting behavior of circular, square, and hexagonal DRCs. They found that circular DRCs were the best at sustaining the trapped air.

The researchers also discovered that the vapor pressure of the liquids influences this entrapment. For low-vapor pressure liquids, such as hexadecane, the trapped gas was intact for months. For liquids with higher vapor pressure, such as water, capillary condensation inside the cavities disrupted long-term entrapment.

Using these design principles, the team is exploring scalable approaches to generate mushroom-shaped cavities on to inexpensive materials, such as polyethylene terephthalate, for frictional drag reduction and desalination.

Journal : Eddy M. Domingues et al. Biomimetic coating-free surfaces for long-term entrapment of air under wetting liquids, Nature Communications, 06 September 2018, DOI:10.1038/s41467-018-05895-x



An Evolutionarily-conserved Wnt3/β-catenin/Sp5 Feedback Loop Restricts Head Organizer Activity in Hydra

Tungau Wajah Demodex folliculorum dan Demodex brevis

Strategi Mutualisme Kantong Semar dan Kelelawar

Batu Mengisahkan Banjir Besar China dan Fajar Dinasti Xia 4000 Tahun Lalu

Alat Batu Di Sulawesi Cahaya Homo floresiensis Berasal